Engineering services
Engineering services, from 3D scanning to the digital twin.
Over 100 services in 8 areas, from 3D scanning to the digital twin. Here are the main ones in each area and the products where we apply them.
01 · REVERSE ENGINEERING
From 3D scan to a model ready to simulate and compare.
We scan the asset as it stands today and turn it into an engineering 3D model: for simulations, to compare it with the current drawing, or to rebuild what has no drawings.
Precision 3D scanning
Structured blue light, laser, LiDAR, drones and photogrammetry depending on the asset: from a propeller at 0.02 mm to entire hulls, plants and structures.
3D modeling from the point cloud
NURBS surfaces, meshes and CAD solids rebuilt from the scan, ready for engineering software.
As-built vs. drawing comparison
Deviation maps between what was built and the design: deformation, wear and changes that were never documented.
Models for simulation
The asset’s real geometry for CFD simulations, engineering studies and modification projects.
Reverse engineering of parts
Metrology of propellers, shafts, rudders and spare parts to study wear or symmetry, or to manufacture them again.
02 · DIGITAL TWINS
The physical and digital asset, connected in real time.
We integrate the 3D model with operating data so you can see your asset’s real condition, analyze its behavior and anticipate failures before they stop the operation.
Real-time integration
We connect the model to IoT sensors, SCADA and ERP: each piece of equipment in the twin shows its current status.
Data analytics
Dashboards with the asset’s critical indicators, history, alerts and trends for informed decisions.
Predictive maintenance
Anomaly detection and maintenance planning based on each piece of equipment’s actual condition.
Asset management on the model
Drawings, manuals, datasheets and maintenance records linked to each piece of equipment in the twin.
03 · EXTENDED REALITY
Virtual, augmented and mixed reality projects.
We develop twins on HoloLens 2, simulators and walkthroughs on Meta Quest, and apps for mobile and web: to train teams and make decisions on the model at full scale.
Mixed reality twins
Mines, fleets and cities on the table with HoloLens 2, with operating data on top of the 3D model.
Training simulators
Shooting range for security forces, navigation and technical procedures, on Meta Quest.
Virtual reality walkthroughs
Scanned vessels and real estate projects at full scale, in the headset or on your phone.
Full-scale project reviews
Ships under construction, plants or pits walked through in VR before building, as we did with SIMA PERÚ.
Immersive training
VR practice in solar energy, electricity and mechanics, plus 3D apps for web and mobile.
04 · DIGITAL PRODUCTS
Specialized software, built for your operation.
We build custom digital products for each client, on their own models and data, in virtual reality, desktop and mobile.
Virtual reality applications
Experiences and work tools for standalone or PC-tethered headsets, with multi-user sessions.
Desktop and web software
3D viewers, asset management and engineering tools, such as the Yakuscan platform and Yakuscan Works.
Mobile apps
3D models and content on the phone: QR access to Yakuscan vessels, or an app for 3D dental nomenclature.
05 · NAVAL ENGINEERING
Every drawing your vessel needs, and the engineering behind it.
We produce and update every drawing of the vessel, and support its design, modification and construction in line with maritime regulations.
Ship drawings
General arrangement, lines plan, structural drawings and any other drawing your vessel needs, for new builds, modifications or regularization.
Naval design
Complete design for a wide range of vessels, in line with maritime regulations.
CFD · computational fluid dynamics
Simulations to optimize hydrodynamic performance, reduce resistance and improve sailing efficiency.
Shipbuilding engineering
We supervise every stage of construction against the design, quality standards and current regulations.
Marine electrical installations
Reliable, safe electrical systems on vessels and marine structures, from design to maintenance.
06 · INDUSTRY AND MINING
Drawings, Scan to BIM and scanning for plants and mines.
We survey your plant or mine as it stands and deliver it as drawings, BIM models and point clouds for maintenance, shutdowns, expansions and asset management.
Scan to BIM
BIM models of plants, buildings and facilities from laser scanning.
As-built drawings
Up-to-date drawings of piping, equipment, structures and warehouses, as they are today.
Clash-free expansions
We check space and clashes on the model before installing new equipment or piping.
Concentrator plants and crushing
As-built surveys of crushing circuits, conveyors, structures and workshops for plant shutdowns and expansion projects.
Tunnels and underground surveying
Tunnels, drifts and underground chambers surveyed with laser scanners.
07 · INSPECTIONS
Underwater, tank and mill inspections, recorded on the model.
We inspect with ROVs, drones and laser scanners, and document every finding on the asset’s 3D model to plan maintenance.
Underwater ROV inspection
4K video of the hull, propellers, shafts and underwater body with no divers in the water; also piers and submerged structures.
Drone inspection
Hulls, superstructures, roofs, tanks and high or hard-to-reach areas.
LiDAR tank inspection
Tank verticality, roundness and deformation measured with a laser scanner, for evaluation under API 653.
Mill liner wear
Laser scanning inside the mill to measure liner wear and plan relining.
Hydrography and seabed maps
Seabed maps for unloading bays and subsea pipelines.
Reports on the model
Findings located on the 3D model, with photos and video, ready for the maintenance plan.
08 · TRAINING
Technical training with simulators and specialized courses.
Virtual reality simulators, the naval design and 3D modeling program, energy courses and in-company programs for your team.
XR simulators
Immersive training for procedures and emergencies, as with the Peruvian Navy.
Naval design and 3D modeling
24-hour online program: modeling a pilot boat and a fishing vessel.
Energy courses
Renewable energy, energy efficiency and smart grids in the Virtual Classroom.
In-company training
Programs designed around your company’s assets and processes.
Equipment and licenses
Marine equipment, hardware and licenses to digitize your operation.
Fire safety, marine supplies, fishing nets, solar energy and more.
Next step
Ready to innovate? Let’s talk.
Our team of specialists analyzes your needs and proposes the engineering solution for your project.
We received your request.
A SAMINS engineer will contact you within 24 business hours.
We could not send the form.
Your details are already written in a message. Send it via WhatsApp and we will reply just as fast.
Send via WhatsApp →